home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1994 #2
/
Monster Media No. 2 (Monster Media)(1994).ISO
/
pcboard
/
usrprf18.zip
/
PROFILE.DOC
< prev
next >
Wrap
Text File
|
1994-06-24
|
16KB
|
333 lines
┌─────────────────────────────────────────────────────────────────────────────┐
│ ░▒▓█ User Profiler █▓▒░ V1.8 GO/4 Software │
└─────────────────────────────────────────────────────────────────────────────┘
What is User Profiler?
User Profiler is a full featured Match-Making door. It will allow your users
to enter a sysop defined profile, by answering sysop defined questions (give
the sample questions a try, they are pretty good, and you can always add more
to them). This profile allows other users to match themselves against it,
along with a full slate of possible matching parameters. Users can match
against Age, Sex, Sexual Preference, Marital Status or against the full
quesstionaire profile. All done real time, with lighting fast searches.
How do I install this thing anyway?
It could not be simpilier, there are two ways to go about it, the first for
PCB novices (or those of us who are a little unsure about the CMD.LST and how
to edit it). The second for CMD.LST pros, you choose which is appropriate
for you.
------------------------------------------------------------------------------
Easy Install:
1. Make a directory to install User Profiler in to. (ie. C:\PCB\PPE\PROFILE).
(a) if you plan on having pictures available for download make a subdirectory
under your PROFILE directory called PIXS.
2. Unzip the full USEPROXX.ZIP file into this newly created Sub direcetory.
3. Run the included Setup program that is included (this program is an EXE, so
it does not have to be installed anywhere.
Setup will ask you a few simple questions, namely.
(If you do not have a PCBOARD.DAT enviroment variable setup it will ask for
the full path to a PCBOARD.DAT, just type in the path to a PCBOARD.DAT).
(a) First you will be asked which Conference you want to install User Profiler
into, if you hit enter here, it will default to conference 0, or the main
conf. You can enter any conferences here that you want.
(b) Next it will ask what you want to have as the command to call the PPE,
for instance you coudl call it PROFILE, or BIO or even MATCHME, whatever
you decide, type it in here.
(c) Next it will ask you what security level you would like to assign to this
program, you can set it up so that only your registered users access it,
or you can set it low enough so that every one can take advantage of it.
(d) Then you will have to enter in the full path to the ppe, so if we take the
above directroy example, we would enter C:\PCB\PPE\PROFILE\PROFILE.PPE
Notice that we also included the PPE name, that way PCB knows what file to
run. Simple...no?
(e) Next the setup program will ask you if there are any command line
parameters, and for this program there is only one which is either a YES
or a NO depending if you want to allow or disallow alias usage, so go
ahead and put a YES or NO in here. Then hit the <ENTER> key.
(d) Next you will be shown a complete list of your choices, and you will be
asked if you want to go ahead and install the PPE, in this case you most
certainely want to install this, so go ahead and hit enter, about a
second later, you will be all done! Go ahead, logon and try out your
new (soon to be very popular) User Profiler door.
4. Unzip the desired question set, either the ADULT.ZIP file (raunchy and
sure to offend some users) or the more tame GENERAL.ZIP (suitable for the
whole family). You can have either set you want, and if you want to run
both, just make a new directory and do a second install. Quick and Simple!
5. Enjoy your users happy responses!
6. Send in your registration checks.
------------------------------------------------------------------------------
Somewhat more involved install:
1. Make a directory to install User Profiler in to. (ie. C:\PCB\PPE\PROFILE).
2. Unzip the full USEPROXX.ZIP file into this newly created Sub direcetory.
3. Load up PCBSETUP, hit a B (FILE LOCATIONS) then hit another B
(FILE LOCATIONS | CONFIGURATION FILES) then cursor down to
(NAME/LOC OF DEFAULT CMD.LST FILE) here you will hit an F2
and you will be presented with a fill in the blank area, the
first question will be the PPE name, here you can name it anything
you want, I called mine PROFILE, then you <TAB> over to the
security field, enter the lowest security that you want to
access this pretty fantastic PPE, then <TAB> over to the
path section, here you will enter the path and filename of the
profile.ppe, for example, C:\PCB\PPE\PROFILE\PROFILE.PPE
If you woudl like to disallow alias usage on the PROFILE command
line place a NO like this C:\PCB\PPE\PROFILE\PROFILE.PPE NO
Simple and quick. Hit <ESC>, it will ask if you want to save the
CMD.LST, and of course you do, so go ahead and say Y, then <ESC>
out a couple more times.
4. Unzip the desired question set, either the ADULT.ZIP file (raunchy and
sure to offend some users) or the more tame GENERAL.ZIP (suitable for the
whole family). You can have either set you want, and if you want to run
both, just make a new directory and do a second install. Quick and Simple!
5. Logon on to the BBS, and give User Profiler a run, see how fast
and easy it is to get around in, and once a few people get into it
see just how much fun it generates!
6 . Send in your registration check.
------------------------------------------------------------------------------
Whats this STUD.PPE do anyway?
STUD.PPE is a sysop tool to allow you to delete a user from the PROFILE.DAT
file. A user coudl decide that they *need* to change their answers, or you
may decide that a user needs to be removed (for your own reasons), just type
an S from the main menu, and you will load up STUD. Here you have to enter
the name of the user that you want to delete, once STUD finds the name, you
will be presented with a short user summary, and then asked if you want to
delete the user. If you answer no, you will be returned to User Profiler,
if you answer yes, that user will be deleted and the PROFILE.DAT will be
packed to remove that specified user, quick, clean and simple. If you decide
that you really screwed up, and need to retrieve that user, no problem! Go to
the USER PROFILER subdir that you created, and find teh file called PROFILE.OLD
once you find that file, delete your PROFILE.DAT, and rename PROFILE.OLD to
PROFILE.DAT, again quick and simple. Enjoy!
STUD is now also used for Adding a picture file to a user profile, and in
the next release it will be used for editing the user record (individual
answers).
STUD can now edit all user basic info (Age, height, weight, sex...etc), just
give it the users name, and choose form the easy to use menu the parameter you
want to change. Quick and Simple!
STUD can now send "bulk mail" to your users, by editing the file called
WHY.NOT (or leaving it as is, except for a quick name change), you can
remind your users to complete those questions! QUick and simple, just let
it know what conference you want to send the messages in, then stand back
and watch it work.
----------------------------------------------------------------------------
Pictures? My users can see each other?
Sure can, and it is very simple too! A few steps will get you set up so that
your user can download those pictures quickly and painlessly.
(we are assuming that you are running this from your MAIN board conf area,
if you are running User Profiler from a seperate conference, please note
section 2 below)
1. Load up PCBSETUP.
2. Choose MAIN BOARD CONFIGURATION (unless you are installing this program
from a seperate conference, then choose that Conference under CONFERENCES)
3. TAB down to where your DLPATH is stored (on the very last field on any
PCBSETUP screen) and hit an F2.
4. Now you just have to type an ALT-I (for insert a line) and type the full
path to your PIXS subdirectory, to keep things simple we made it right
under your profiler sub directory, so you would type something that looks
like this: C:\PCB\PPE\PROFILE\PIXS\
5. Now hit an <ESC> and make sure that you save it.
6. All set with that part.
Now you will have to wait until your users start sending you pictures of
themselves, you might be able to make a few bucks by offering a scanning
service. Once you get some pictures, place them in the C:\PCB\PPE\PROFILE\PIXS
sub directory. Then you load up User Profiler, and choose S for the
Sysop Tool, while in the Sysop tool, choose (A) add a picture file to a user
record. Then you wil lbe prompted with the user name you want to attach
this picture file to, and once STUD finds the user name you will be prompted
for a *full* name of the picture file (no path neccessary), so for example
if you have a picture called BILLMARC.GIF you woudl type that all in. (what
I am tring to say is type in the name and extension of the picture).
After you do this, you will see that that user now has a picture ready for
other users to download. Quick and simple actually.
----------------------------------------------------------------------------
I heard that there is a neat News screen that I can get also...how?
Simple, you will need to set a call in your security specific file like this
!C:\PCB\PPE\PROFILE\PROFILE.PPE BLT
(a security specific file is a file named the same as a security level that
you want to display things to, so if you have a security level of 30, then
just create a file called 30, with the following line in it).
Note the BLT on the end, that BLT will tell the program to skip running the
main program and just display a small screen to your users, this screen will
show howmany people are in the profile database, and breaks it down into how
many males and how many females. Sure does do a good job of letting people
know that the Profile foor is there.
----------------------------------------------------------------------------
Files Needed / Included with this ZIP:
PROFILE.PPE - This is the main program, it will perform all the neccessary
matching functions, etc.
PROFILE.DAT - Bet you don't see this one yet, it will be created and
maintained automatically for you, this is a hands off program
so you don't really have to worry about it.
MATCH-1.HLP - The first help screen for the matching section.
MATCH-2.HLP - The second help screen for the match area (I could have kept
these internal to the program, but I know someone some time
is going to call me up asking to externalize it, so we did it
form the beggining).
PROFILE1.HLP - The main help screen for the general section of the profile
program, basic instructions.
PROFILE2.HLP - A secondary help screen that will explain a few of the more
exotic usages of the Profile door.
STUD.PPE - The Sysop Tool for User Deletion & Editing.
WHY.NOT - A canned message you can change that gets sent to users that
fail to complete the entire question set. You access this
function through STUD.PPE (The S command on the main menu).
ADULT.ZIP \ Question sets ready for your use, just decide which one you
GENERAL.ZIP / want to use and unzip it into your PROFILER directory.
*.QUE - These are the sample question set, they are pretty good as
far as general questions go, feel free to delete or edit these
or create your own. (more on the QUE file naming convention
a little later).
------------------------------------------------------------------------------
QUE File Naming Convetion:
Told you we woudl get to it...Each one of those QUE files contains a set
file structure, it is simple to understand if we look at one, so here it
is:
1 (total question lines)
3 (total answer lines)
How long have you resided in your community (actual question line)
New comer (actaul answer 1)
1-2 years (actual answer 2)
3-5 years (actual answer 3)
So we see above the first line is just the number of question lines that
there are, in this case it is one, if there were 2 lines to the question,
then you would have a 2 in here, the second line is the total number of
answers, each answer can be a total of one line, in this example we have
3 answers so we have a 3 on line 2. (simple...no?) then we have the
actual question line, then the following answer lines.
Please name you files in this way: 1.QUE, 2.QUE, 3.QUE...etc. Do not have
blank spaces between numbers such as 1.QUE 3.QUE, the program keeps track of
the number of questiopns by counting them, so if you get out of sequence,
some of your questions will not be taken advantage of (and that truley would
be a shame).
Any questions? Call me up (number at end of this doc file).
------------------------------------------------------------------------------
How can I pay for this fantastic program (it does just what I want!)
Ok, there are several ways to get your registration number for this program
the first and fastest way is to call up one of the support boards (which ever
one happens to be free at the exact moment you want to register - numbers at
the end of this doc file). Once on-line, join the support conference for
GO/4 Software, it will be prominently marked in the conference menu, on
Survival Tech BBS it is Conf 2. While in the support conf, type KEY this
will enter in to our on-line order program, it will ask for the usual name and
address info, it will then ask which program you want to register, choose
PROFILER. You will then have an invoice, and a key file generated for you,
download both, install the key file into your Profiler directory, and write us
a check.
Whats this? Get the KEY file, then write you a check? Isn't that backwards?
Well, for most software companies it is, but we have been working on the
honor system for about a year now, and the response has been great, it really
restores our faith in human beings when we see people sending in checks *after*
they get their KEY files. We do have some people who steal from us, but they
usually find out that that does not pay. When you are generating your own
KEY files, please notice that we have many exciting products for PCB, and those
products were made possible by all of you sending in those checks. A good
thing to keep in mind! (My baby girl appreciates it as that is how we get our
food & diaper money).
Note: The unregistered version will have a .5 second delay per user!
------------------------------------------------------------------------------
How do I get in touch with GO/4 Software?
Give us a call, voice we can be reached between 09:00am to 09:00 pm (est)
at (212)-777-8282, if that line is busy, or it just rings (hey, we all have
to eat!), then call up on bills home line at (212)-505-2654, again, please
call between the above hours, my daughter is a light sleeper, and wakes up
at the ring of the phone. We are more than happy to hear, compliments,
ideas, enhancements or even gripes!
You can register User Profiler by calling with your modem (anytime) to:
GO/4 Software Support / Registration
Survival Tech BBS (212)-777-0225
EDS Development (812)-423-3394
Or you can fill out a check, fill out the enclosed ORDER.FRM, and mail both
to:
Bill Marcy
222 East 19th Street #2G
New York, NY, 10003
We will mail you out your key file the same day we recieve your check (it is
a lot faster to call up and get the KEY file yourself, but hey, it's up to you)
Please, Make all checks payable to Bill Marcy, and only U.S. Funds please.
GO/4 Software is Bill Marcy and Eric Scales
Thanks for using our software!